- BOSCH GLM 150C PVC LASER DISTANCE METER WITH INBUILT CAMERA
Product highlights
The Bosch distance meter 150m range is a small lightweight and easy to use device that can be used to accurately measure distance. It comes with a measuring accuracy of +/- 1.5mm. This product is a digital LCD distance meter which can take measurements in both metric and imperial units. It is an essential tool to make accurate measurements and documentation of all surroundings including outdoors. It has a digital viewfinder with zoom function meant for long distance measurements. The instrument has Optimal readability due to a large 2.8” IPS color display with extra robust cover glass.
Applications
- Collection and documentation of measured values
Technical details
| Laser diode |
650 nm, < 1 mW |
| Measurement range |
0.08 – 150.00 m |
| Laser class |
2 |
| Measurement accuracy, typical |
± 1.5 mm* (*plus use-dependent deviation) |
| Units of measurement |
m/cm, ft/inch |
| Memory capacity (values) |
50 |
| Dust and splash protection |
IP 54 |
| Tripod thread |
1/4″ |
| Digital viewfinder |
integrated |
| Data transfer |
Bluetooth™ Smart |
| Supported Android devices |
Smartphone with Android 4.3 or higher |
| Supported iOS devices |
iPhone 4S or higher, iPad (3rd Gen. or higher), iPad Air (1st Gen. or higher), iPad mini (1st Gen. or higher) |
| Laser colour |
Red |
- TESTO 160 THL – WIFI DATA LOGGER WITH INTEGRATED SENSORS FOR TEMPERATURE, HUMIDITY, LUX AND UV RADIATION
Product highlights
The testo 160 THL climate logger with integrated temperature, humidity, lux and UV sensors ensures comprehensive monitoring of ambient climate and cumulative light exposure in spaces. The logger transfers measurement values by wireless LAN to the online store (Testo Cloud) and data can be accessed at any time with the testo Saveris 2 App or by PC/tablet/smartphone and a normal browser. If limit values are exceeded, an alarm is immediately provided by SMS and/or e-mail. For light intensity, an alarm can also be triggered if the accumulated light quantity within a day, a week or a month exceeds a limit value.
Applications
- Microclimate monitoring
- Ambient climatic conditions documenting
- Light measurement
Technical details
| Humidity – Capacitive |
| Measuring range |
0 to 100 %RH (non-condensing) |
| Accuracy |
±2.0 %RH at +25 °C and 20 to 80 %RH
±3.0 %RH at +25 °C and < 20 and > 80 %RH
±1.0 %RH hysteresis
±1.0 %RH / year drift |
| Resolution |
0.1 %RH |
| Temperature |
| Measuring range |
-10 °C to +50 °C |
| Accuracy |
±0.5 °C |
| Resolution |
0.1 °C |
| Light |
| Measuring range |
0 to 20000 Lux |
| Accuracy |
DIN 5032-7 Class C-compliant.
±3.0 Lux or ±3.0 % of mv refers to reference DIN 5032-7 Class L) |
| Resolution |
0.1 Lux |
| Radiation |
| Measuring range |
0 to +10000 mW/m² |
| Accuracy |
±5 mW/m² or ±5 % of mv (refers to external reference) |
| Resolution |
0.1 mW/m² |
| General data |
| Operating temperature |
-10 to +50 °C |
| Protection class |
IP20 |
| Memory |
32,000 Measuring values / Sum of all channels |
| Storage temperature |
-20 to +50 °C |
- TESTO 540 – POCKET-SIZED LUX METER
Product highlights
The testo 540 lux meter is designed for measuring natural and artificial lighting conditions in the workplace. The light sensor is modelled on the spectral sensitivity of the human eye and is ideal for measuring lighting conditions in a variety of workplaces. The compact, easy-to-use lux meter has several useful functions and features including a large, easy-to-read display, min/max values which can be shown at the touch of a button, a hold function that allows you to freeze the last reading and a protective cap for safe storage.
Applications
- To measure the natural and artificial lighting conditions.
Technical details
| Light |
| Measuring range |
0 to 99999 Lux; 0 to 9300 ftc |
| Accuracy |
±3 Lux or ±3 % (compared to reference instrument at 90° light irradiation) |
| Resolution |
1 Lux (0 to 19999 Lux)
10 Lux (Remaining Range) |
| General data |
| Operating temperature |
0 to +50 °C |
| Protection class |
IP40 |
| Storage temperature |
-40 to +70 °C |
- TESTO 410-2 – VANE ANEMOMETER
Product highlights
Testo 410-2 rotating vane anemometer is designed for measuring air velocity, air temperature and humidity. Compact in design, the handheld instrument features an in-built 40mm rotating vane which calculates the wind speed passing through the impeller. With a measuring range of 0.4 to 20 m/s, the 410-2 anemometer can even be used for low flow speeds. In addition, the 410-2 is equipped with a humidity sensor and an NTC temperature sensor with a measurement range of -10 to + 50°C which helps to measure air temperature and humidity reliably.
The 410-2 displays the units for air velocity and temperature as m/s, km/h, fpm, mph, kts, Beaufort, °C, °F and wind chill.
Applications
Suitable for both indoor and outdoor measurement applications to measure air velocity in
- HVAC system – Ducts
- Built spaces – Natural ventilation
Technical details
| Temperature – NTC |
| Measuring range |
-10 to +50 °C |
| Accuracy |
±0.5 °C |
| Resolution |
0.1 °C |
| Measuring rate |
0.5 s |
| Humidity – Capacitive |
| Measuring range |
0 to 100 %RH |
| Accuracy |
±2.5 %RH (5 to 95 %RH) |
| Resolution |
0.1 %RH |
| Velocity – Vane |
| Measuring range |
0.4 to 20 m/s |
| Accuracy |
±(0.2 m/s + 2 % of mv) |
| Resolution |
0.1 m/s |
| General data |
| Operating temperature |
-10 to +50 °C |
| Protection class |
IP10 |
| Storage temperature |
-20 to +70 °C |
- TESTO 635-2 U-VALUE PROMO SET
Product highlights
To evaluate the heat insulation capability of a component (walls, windows), it is essential to know the heat transfer coefficient, or “U-value”.
The testo 635-2 U-value set is designed to calculate the U-value of any construction assembly. Along with Testo 635-2 thermohygrometer, all necessary temperature measurements can be carried out simultaneously, both indoors and outdoors: ambient air temperature, wall temperature inside, outside temperature via wireless transmission. The testo 635-2 thermohygrometer then calculates the U-value automatically and indicates this on the display. The measurement data can be stored in the instrument and subsequently evaluated on the PC using the software.
3 temperature values are required for calculating the U-value:
- Outside temperature
- Surface temperature of the internal wall
- Indoor air temperature
Using the new wireless probes, the outer temperature can be quickly and easily measured with the window closed. The probe is simply positioned outside and transmits readings by radio to the measuring instrument in the room.
With the U-value probe the two other temperatures required are measured using one probe. To measure surface temperature, three wires from the U-value probe are attached to the inner wall using modelling clay. The air temperature is measured by a sensor on the probe plug.
The three temperatures needed are determined by the connected temperature probes and transferred to the testo 435. The instrument calculates the U-value from them and shows it directly in the display.
Applications
- Testing the thermal properties of materials
- Study the heat transfer mechanism of various sections of roof/wall assembly
Technical details
| Temperature – NTC |
| Measuring range |
-40 to +150 °C |
| Accuracy |
±0.2 °C (-25 to +74.9 °C)
±0.4 °C (-40 to -25.1 °C)
±0.4 °C (75 to +99.9 °C)
±0.5 % of mv (Remaining Range) |
| Resolution |
0.1 °C |
| Temperature – TC Type K (NiCr-Ni) |
| Measuring range |
-200 to +1370 °C |
| Accuracy |
±0.3 °C (-60 to +60 °C)
±(0.2 °C + 0.5 % of mv) (Remaining Range) |
| Resolution |
0.1 °C |
| Humidity – Capacitive |
| Measuring range |
0 to 100 %RH |
| Resolution |
0.1 |
| Absolute Pressure |
| Measuring range |
0 to 2000 hPa |
| Resolution |
0.1 hPa |
| General data |
| Operating temperature |
-20 to +50 °C |
| Storage temperature |
-30 to +70 °C |
- TESTO 440 DP – AIR VELOCITY & IAQ MEASURING INSTRUMENT WITH INTEGRATED DIFFERENTIAL PRESSURE
Product highlights
Testo 440 dP air velocity and IAQ measuring instrument used in combination with high quality probes can measure and store all air velocity and IAQ parameters. Up to 3 probes can be connected simultaneously a Bluetooth probe, a wired probe, and a temperature probe with a type K thermocouple connector.
CO2 probe measures the CO2 concentration which is a primary indicator of indoor air quality. Poor air quality due to excessive CO2 concentration results in tiredness and lack of concentration and can even cause illnesses. The CO2 concentration should therefore not normally exceed 1,000 ppm. Use the probe to determine CO2 concentration, air humidity and air temperature. Wet bulb temperature, dew point and absolute humidity are calculated at the same time.
The globe thermometer (thermocouple type K) probe enables standard-compliant determination and checking of the radiant heat. The hollow sphere has a diameter of 150 mm and there is a thermocouple type K at its centre for measuring the temperature. For example, if a significant temperature difference between the ambient and globe temperature is detected, the cause could be high solar radiation through the window.
Applications
- CO2 probe including temperature and humidity sensor can be used to check the indoor climate (indoor air quality), e.g. in offices, production areas or storage facilities.
- The globe thermometer probe is suitable for the measurement of radiant heat – e.g. in the context of standard-compliant comfort level measurement at the workplace. Thermal comfort is a crucial factor in terms of a person’s physical and mental capabilities – and should be ensured through regular measurements of the individual parameters directly at the workplace.
Technical details of CO2 probe
| Humidity – Capacitive |
| Measuring range |
5 to 95 %RH |
| Accuracy |
±3 %RH (10 to 35 %RH)
±2 %RH (35 to 65 %RH)
±3 %RH (65 to 90 %RH)
±5 %RH (Remaining Range)
±0.06 %RH/K (0 to +50 °C)
long-term stability: ±1 %RH / year
Hysteresis: ±1.0 %RH |
| Resolution |
0.1 %RH |
| Temperature NTC |
| Measuring range |
0 to +50 °C |
| Accuracy |
±0.5 °C |
| Resolution |
0.1 °C |
| Absolute Pressure |
| Measuring range |
+700 to +1100 hPa |
| Accuracy |
±3.0 hPa |
| Resolution |
0.1 hPa |
| Ambient CO2 |
| Measuring range |
0 to 10000 ppm |
| Accuracy |
±(50 ppm + 3 % of mv)
(0 to 5000 ppm)
±(100 ppm + 5 % of mv)
(5001 to 10000 ppm) |
| Resolution |
1 ppm |
| General data |
| Operating temperature |
-5 to +50 °C |
| Probe head diameter |
30 mm |
| Storage temperature |
-20 to +60 °C |
Technical details of Globe Thermometer Probe
| Temperature – TC Type K (NiCr-Ni) |
| Measuring range |
0°C to +120 °C |
| Accuracy |
Class 1 ¹⁾ |
| 1) According to standard EN 60584-1, the accuracy of Class 1 refers to -40 to +1000 °C (Type K), Class 2 to -40 to +1200 °C (Type K), Class 3 to -200 to +40 °C (Type K) |
| General data |
| Emissivity |
0,95 |
| Probe head diameter |
150 mm |
| Product colour |
Black |
- 12-CHANNEL DATALOGGING THERMOMETER MAKE: EXTECH & MODEL: TM500
Product highlights
The Extech TM500 is a 12-channel datalogging thermometer designed to take temperature measurements using six different thermocouple types (J, K, E, T, R, S), allowing the user to measure temperatures ranging from -148 to 2372°F (-100 to 1500°C). The TM500’s large screen displays CH1 to CH8 or CH9 to CH12 at any given time. All 12 readings can be recorded in Excel-friendly format (with date and time stamp) on the included SD card. Additional features include a user programmable sampling rate (1 to 3600 seconds), MIN/MAX, Data Hold, and more.
The easy-to-use TM500 indoor/outdoor thermometer features user programmable sampling rates (1 to 3600 seconds) to accommodate the current application. Additionally, the device’s internal memory can store 99 readings which will be beneficial when the included SD card is full.
Applications
Useful to study the thermal performance of various spaces in buildings.
Technical details
| Temperature |
| Type J |
148 to 2372°F (-100 to 1300°C) |
| Type K |
148 to 2372°F (-100 to 1300°C) |
| Type T |
148 to 752°F (-100 to 400°C) |
| Type E |
148 to 1652°F (-100 to 900°C) |
| Type R |
32 to 3092°F (0 to 1700°C) |
| Type S |
32 to 2732°F (0 to 1500°C) |
| Resolution |
0.1°/1°C |
| Basic Accuracy |
±0.4% rdg (+1.8°F/+1°C) Types J, K, E, T; ±0.5% rdg (+5°F/+3°C) Types R, S |
| General Data |
| Datalogging |
20M data records using a 2GB SD card |
- TESTO 816-1 – DB METER FOR SOUND LEVEL MEASUREMENT
Product highlights
Testo 816-1 is useful to measure the sound levels in spaces and the measuring instrument can be switched from Slow (1 sec.) to Fast (125 ms). It is also possible to switch between the frequency weighting characteristic curves A and C and vice versa. Characteristic curve A corresponds to the sound pressure sensitivity of the human ear, while characteristic curve C can evaluate low-frequency components of a noise. The integrated data store allows the storage of over 30000 measurement values in the instrument. These can be administered using the software included which also allows online measurements over a longer period to be carried out.
Applications
- Ideal for sound level measurements at workplaces, in industrial and production halls, and in public places.
Technical details
| Sound Pressure |
| Measuring range |
30 to 130 dB |
| Frequency Range |
20 Hz to 8 kHz |
| Accuracy |
±1.4 dB (under reference conditions: 94 dB, 1 kHz) |
| Resolution |
0.1 dB |
| Measuring rate |
0.5 s |
| General data |
| Operating temperature |
0 to +40 °C |
| System requirements |
Requires iOS 13.0 or newer; requires Android 8.0 or newer; requires mobile end device with Bluetooth 4.2 |
| Storage temperature |
-20 °C to +60 °C |
| Frequency weighting |
A / C |
| Microphone |
0.5 “ |
| Dynamic range |
100 dB |
| Time weighting |
FAST 125 ms / SLOW 1 sec |
| Storage temperature |
-10 to +60 °C |
- TESTO 805I – INFRARED THERMOMETER WITH SMARTPHONE OPERATION
Product highlights
The testo 805i infrared thermometer, in conjunction with a smartphone or tablet, functions as a compact IR thermometer for wall temperatures, as well as fuse and component temperatures in air conditioning systems. The measuring point is marked clearly with a laser circle made up of eight dots. With the testo Smart App installed on a terminal device, users can view their readings conveniently. The App can also be used to create and document images, including temperature values and laser marking. All measurement data is displayed either as a chart or in table form. The measurement data log can then be emailed directly as a PDF or Excel file.
Applications
- Used to study the heat transfer from various building components.
Technical details
| Temperature – Infrared |
| Measuring range |
-30 °C to +250 °C |
| Accuracy |
±1.5 °C or ±1.5 % of mv (0 to +250 °C)
±2 °C (-20 to -0.1 °C)
±2.5 °C (-30 to -20.1 °C) |
| Resolution |
0.1 °C |
| General data |
| Operating temperature |
-10 °C to +50 °C |
| System requirements |
Requires iOS 13.0 or newer; requires Android 8.0 or newer; requires mobile end device with Bluetooth 4.2 |
| Storage temperature |
-20 °C to +60 °C |
